SpinTech SE
Fumalife's laboratory electrospinning machine with adjustable voltage, a touchscreen syringe pump and collector options — built for reproducible nanofiber research.
Every control you need, nothing you don't
SpinTech SE focuses on the parameters that most strongly influence fiber morphology.
Adjustable high voltage
Fine-tune the electric field to initiate a stable Taylor cone and control jet whipping for your polymer system.
Touchscreen syringe pump
Set, monitor and repeat flow rates precisely — essential for consistent fiber diameter across runs.
Collector options
Use a flat plate for randomly oriented mats or a rotating drum to produce aligned fibers.
Lab-safe enclosure
Enclosed spinning chamber with door interlock and emergency stop protects operators during high-voltage work.
SpinTech SE at a glance
Indicative configuration for laboratory research. Contact our team for the full datasheet and configuration options.
| Model | SpinTech SE |
| Configuration | Single-needle, laboratory scale |
| High-voltage supply | Adjustable output (kV range on datasheet) |
| Feeding system | Touchscreen syringe pump, programmable flow rate |
| Collector | Flat plate · rotating drum (optional) |
| Tip-to-collector distance | Adjustable |
| Chamber | Enclosed, transparent viewing window |
| Safety | Door interlock · emergency stop · grounding |
| Power | AC mains (per datasheet) |
| Support | Installation, training, local service in Indonesia |
Specifications subject to change. Refer to the official datasheet for full details.
From solution to sample in one session
Prepare solution
Dissolve your polymer and load the syringe.
Set parameters
Program flow rate, voltage and distance on the controls.
Spin & observe
Watch cone and jet stability through the viewing window.
Collect & characterize
Remove the mat for SEM, FTIR or performance testing.
What researchers build with SpinTech SE
See SpinTech SE live
Book a demo at your lab or ours. Bring your polymer system and leave with real samples and parameter insights.
- Hands-on demonstration with your material
- Recommended starting parameters
- Purchase or rental quotation
Frequently asked questions
Can't find what you need? Our team responds within one working day.
Which polymers can SpinTech SE process?
Most solution-spinnable polymers such as PVA, PAN, PCL, PVDF and nylon — subject to suitable solvent systems. Ask us about your material.
Can I produce aligned fibers?
Yes, with the rotating drum collector option.
Is training included?
Every SpinTech SE installation includes operator training.
What warranty and service do you offer?
Warranty and service terms are included in your quotation; local support is available in Indonesia.